Details on how to do this task: Make data accessible
PIHM has been validated by the V-catchment. Here we prepared the input files for the V-catchment simulation. The V-catchment is benchmark example for the 2-D overland surface flow coupled with channel routing
"P. Di Giammarco et al., 1996". In the benchmark example, a rainfall event of 90-minute duration, 3e-6 m/s is applied on the V-catchment. The runoff at the outlet is usually compared for model validation. In this section, we shows how to use PIHM simulate the rainfall-runoff response of the V-catchment. PIHM uses triangular mesh to represent the domain. The grid resolution may vary. Here, we used 782 triangles ( the area ranges from 1534.9m
2 to 2379.5m
2, with an average of 2046.0m
2) to represent the domain
Figure 1: PIHM mesh and domain for the V-catchment. The geometry of the catchment and the channel is from
[1]. The PIHM input file of the V-catchment is upload in . The users need the following step to finish the V-catchment simulation:
1.
2.
The data is from the experiment in 1974, at Shale Hills, PA.
